About TCH Hardware

This author has not yet filled in any details.
So far TCH Hardware has created 136 blog entries.
20 06, 2017

Mill-Max – Swage Mount PCB Pins For Interconnect Applications

By | June 20th, 2017|connectors, Mill-Max, swage|

Mill-Max is adding to its diverse mix of swage mount PCB pins with six new offerings designed for interconnect applications.  These swage mount terminals are designed to be mechanically fastened to a board or panel and plugged into sockets or [...]

7 06, 2017

The Importance of Protecting IIoT From The Environment

By | June 7th, 2017|door access, electronics, harsh environments, iiot, italtronic, security, security systems|

By Peter VowellWhile you may be able to design and assemble a fully-functional IoT device, it will quickly wither and die without proper protection. There are a variety of environmental factors to consider when it comes to electronics, including heat, [...]

31 05, 2017

DIY and The IIoT

By | May 31st, 2017|electronics, iiot|

By Peter VowellCreating custom solutions for your unique problems has never been easier. Today’s immense DIY electronics community has made large strides in integrating with the internet of things. The ease of access to IoT solutions means remotely operated problem [...]

23 05, 2017

Mill-Max Introduces a New Ruggedized Long Stroke 4 mm Pitch Spring-Loaded Connector

By | May 23rd, 2017|Mill-Max, spring-loaded connectors|

 Sourced from mill-max.comNew 4mm Pitch Spring-Loaded Connectors from Mill-Max!Mill-Max introduces a new ruggedized long stroke 4 mm pitch spring loaded connector (SLC) that is aimed at tough applications in rough environments. The new 858 series are ideal for applications where the connector [...]

17 04, 2017

How do you manage your Thermal Budget?

By | April 17th, 2017|heat sinks, mersen, thermal management|

Managing a Thermal BudgetBy Peter VowellWhen electrical devices are running, they consume energy to perform a certain task. But when devices utilize that electrical energy, they convert much of it into a different form - heat. The IoT and wireless [...]

1 03, 2017

What is the future for IoT and industrial Medical equipment?

By | March 1st, 2017|iiot, medical equipment, wheelchairs|

IoT and the Future of Industrial Medical EquipmentBy Peter VowellThe Internet of Things (IoT) has made huge strides over the past half decade. While it may have started with smart watches and basic fitness trackers, the IoT has spread to [...]

16 02, 2017

Mill-Max: Improve your wire attachment process with six new pins and receptacles and three mated pairs

By | February 16th, 2017|Mill-Max, wire termination|

New Wire Termination Pins and Receptacles from Mill-MaxMill-Max is expanding its line of wire termination products by introducing six new pins and receptacles, three mated pairs, which facilitate the wire attachment process. Each features a solder cup for easy and [...]

9 02, 2017

Mill-Max: Space-saving spring-loaded solutions for a variety of interconnect applications

By | February 9th, 2017|Mill-Max, pogo connectors|

Fine Pitch Right Angle & Horizontal SMT Spring Loaded (Pogo) ConnectorsMill-Max is pleased to introduce new .050” (1,27 mm) pitch spring-loaded right angle and horizontal SMT connectors to its standard product lineup.  These new connectors offer space saving spring-loaded solutions [...]

2 02, 2017

CONEC: Reduce the cost of wiring with the Sensor Actor Line Y-Splitter

By | February 2nd, 2017|Conec, sensor, y-splitter|

Sensor Actor Line Y-Splitter"The CONEC product portfolio of passive distribution components has been expanded to include some new variants. In addition to the previously existing versions of Duo-splitter, i.e. T-splitter, a new Y-splitter line has been developed.The basic tasks of [...]

4 01, 2017

2mm Pitch Spring-Loaded Mill-Max Connectors: Durable, Save Space (Through-Hole Version)

By | January 4th, 2017|2mm pitch, connectors, Mill-Max, spring-loaded|

3 01, 2017

Industry 4.0 Trends for 2017 (that are already here)

By | January 3rd, 2017|digital industry, iiot, industry 4.0, robotics|

It might be a tad premature to declare the revolution officially upon us but with exponential growth and adoption of digital industry, interconnected systems being integrated more and more into the value chain and the converging technologies beneath it all, [...]

20 12, 2016

10 Essential Quotes for OEMs

By | December 20th, 2016|david pogue, design, jeff bullas, jeremy blum, manufacturing, oems, quote|

6 12, 2016

4 IIoT trends to look for in 2017!

By | December 6th, 2016|door access, hvac systems, iiot, occupant safety, water management|

The Industrial Internet of Things (IIoT) is poised to explode, transforming and improving the way businesses operate around the globe. The potential for automation of testing, preventative maintenance systems, and energy-reducing platforms has caused predictions of incredible economic influence. According [...]

5 12, 2016

ADELS: SMDflat545 – Large Conductor Size, High Current Capacity

By | December 5th, 2016|Adels, led connectors, led modules, smdflat 545|

“Type SMDflat 545 is considered the “big brother” of the proven LED connector type SMDflat 345, with its reduced profile of 3.45 mm. For years, it’s been ideal when connecting LED modules.”TORONTO, December 5, 2016:  With a 6mm pin spacing [...]

17 11, 2016

CONEC SuperCon: Save on costs and installation space with hybrid connector technology

By | November 17th, 2016|conect, hybrid connections, supercon|

Save on costs and installation space"For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high.Separate cables from the switch cabinet are used for the power supply and control of every [...]

18 10, 2016

Mill-Max USB 3.1 is twice as fast as the 3.0

By | October 18th, 2016|Mill-Max, USB 3.1|

Mill-Max adds to its line of USB IO Sockets with the introduction of the Vertical SMT SuperSpeed Universal Serial Bus 3.1, Type C. Here's what you need to know:2X faster than USB 3.0.More efficient data transfer.Higher through-put.Improved I/O power efficiency. Mill-Max already [...]

28 09, 2016

CONEC M12x1: Maximum design flexibility

By | September 28th, 2016|Conec, standard cat 6a|

"As a result of the permanent growth of digital communication and the massive increase in data volumes, especially in the industry 4.0, it is necessary to ensure faster and broader transmission of information. CONEC makes a step in this direction [...]

26 09, 2016

Student touted as a “future industry leader” after designing an app to help railway engineers.

By | September 26th, 2016|architecture, power substations, rail engineers|

Student scoops national prize for designing 'innovative' engineering app"Through his own initiative, Fahad learnt the necessary programming languages to design and build an app, which tells designers instantly if a planned installation is compatible with HOPS." Read more...8 Steps to follow [...]

6 09, 2016

Mill-Max: Save Space with Right Angle & Horizontal SMT Spring Loaded (Pogo) Connectors

By | September 6th, 2016|interconnect solutions, right angled connectors|

"The Mill-Max .050” (1,27 mm) pitch spring-loaded right angle and horizontal SMT connectors offer space saving spring-loaded solutions for a variety of interconnect applications.Both connector series are ideal for mating boards in a perpendicular orientation or for parallel, daisy chaining [...]

3 08, 2016

In case you missed the top 5 Design Engineering stories of last month: Cybersecurity risk of 3D Printing and more…

By | August 3rd, 2016|cybersecurity, mars rover|

We decided to collect what we thought were are some of the best design engineering-related articles published in July and feature them in this roundup.The cybersecurity risks of 3D printing A team of cybersecurity and materials engineers from NYU Tandon School of [...]

Load More Posts