About TCH Hardware

This author has not yet filled in any details.
So far TCH Hardware has created 136 blog entries.
17 05, 2018

HellermanTyton’s Range of Releasable Cable Ties

By | May 17th, 2018|Conta-Clip|

LR55-Series - Cable Ties that are Outside Serrated for MarkingDifferent Colors AvailableFeaturesReleasable and reusable cable tieVarious colours for applications needing colour codingExtended trigger for simple and quick release of tiesRisk of accidental release is minimisedOutside serration prevents damage to cable insulation. Popularly [...]

3 05, 2018

CONEC Introduces Watertight & EMC Protected IP67 D-SUB Filter Connectors

By | May 3rd, 2018|Conta-Clip|

    IP67 D-SUB CONEC SlimCon filters are the newest addition to the IP67 D-SUB filter connector family.  Due to increasing data transmission rates and operating frequencies, it is becoming increasingly important to ensure the function of electrical devices and systems [...]

4 04, 2018

Oupiin – Back to Basic: 0.1 (2.54mm) Breakaway High Temp Header

By | April 4th, 2018|Mill-Max|

Single Row and Dual Row, Through Hole Side to Side and End to End Stackable High Temp Housing for Wave or IR Reflow Soldering Process. Stock Available Competitive Pricing RoHS Compliant  

4 12, 2017

The New Ratchet P-Clamp by HellermanTyton separates cable routing and cable fastening

By | December 4th, 2017|Hellermann Tyton|

Say goodbye to cable insulation damage caused by ill-fitting cable clamps. Say hello to the Ratchet P-Clamp.  - source: HellermannTyton -  The new Ratchet P-Clamp cable clamp separates cable routing and cable fastening In answer to the dilemma, HellermannTyton product [...]

9 11, 2017

Southco’s New Padlockable Wing Knob Cam Latch

By | November 9th, 2017|southco|

New Padlockable Cam Latch Features Redesigned Wing Knob source: Southco - Rachel Pilgren-Kane Southco has redesigned the wing knob version of its successful E5 Cam Latch series with a stylish, streamlined design that promotes improved ergonomics and enhanced security. The [...]

12 10, 2017

Press Release: Conta-Clip Easy-mount cable entry with IP66 Ingress Protection

By | October 12th, 2017|Conta-Clip|

Figure: Easy to assemble and mount: Cable duct system KDSClick with IP66 ingress protectionPress Release:KDSClick from CONTA-CLIP:Easy-mount cable entry with IP66 ingress protectionHövelhof – The new IP66 cable entry system KDSClick from CONTA-CLIP allows for quickly feeding open-ended cables or pre-assembled [...]

11 10, 2017

Southco releases New Mobile Electronic Access Bluetooth Controller

By | October 11th, 2017|southco|

    Southco has recently expanded its line of Electronic Access Solutions with an access controller that allows Bluetooth-enabled devices, such as smartphones and tablets, to be used as a key. Southco’s EA-BT BLUETOOTH® Lock Controller provides a breakthrough, disruptive technology for [...]

28 07, 2017

Mill-Max: Solder cup spring-loaded pins now have over 60% more stroke!

By | July 28th, 2017|Mill-Max|

  Mill-Max is expanding the solder cup, spring loaded connector series with the introduction of new versions delivering over 60% more stroke than the existing series. The single row 824-22-0XX-00-005000 and double row 826-22-0XX-00-005000 provide a mid-stoke of .045” (1,14 mm) with a maximum [...]

14 07, 2017

The Importance of Equipment Ergonomics in the Industrial Sector

By | July 14th, 2017|Conta-Clip|

In an office, ergonomics often refers to the height of a computer monitor, or the way a keyboard is laid out and situated. These types of issues are easily adjustable and can be quickly resolved. The same can’t be said [...]

13 07, 2017

Series CPN & CPR – Self-Clinching Plungers

By | July 13th, 2017|Captive Fasteners|

12 07, 2017

CBI-electric launches New Socket Outlet with integral USB ports

By | July 12th, 2017|CBI Electric|

CBI-electric: low voltage is pleased to announce the launch of their new USB Socket Outlet.  The new aesthetically pleasing socket outlet is a standard 240 V AC Euro socket outlet with a twist. In addition to the option [...]

12 07, 2017

Hammond Introduces New Quadrex (Phillips & Robertson Combo) Rack Screws

By | July 12th, 2017|Hammond Manufacturing|

If you're in Canada, every contractor knows and usually prefers the Robertson (square head) screw head. Known for its tapered square head the Robertson screw head offers a lower risk of stripping during installation. In other countries the Robertson [...]

12 07, 2017

“Auto-In/Ultra-Low” SMT 2032 Coin Cell Holder

By | July 12th, 2017|Keystone|

When circuit board height is a critical design parameter, Keystone offers a solution with an ultra-low profile holder for the #2032 Lithium Coin Cells. These new holders  rise only 2mm above the PCB surface [...]

12 07, 2017

TEC Series Wedge Locking Washers

By | July 12th, 2017|Sherex|

Tonawanda, NY May 31, 2017 – Sherex Fastening Solutions, a global leader in engineered fasteners, tooling, and automation, is pleased to announce the launch of a new wedge locking washer product line. “The TEC Series product line adds another [...]

12 07, 2017

Tianli Terminal Block

By | July 12th, 2017|Tianli|

Sourced from http://www.china-tianli.cn

12 07, 2017

Cooltron Heatsinks

By | July 12th, 2017|Cooltron|

Cooltron is please to  introduce new capabilities for Heat Sink products. The Cooltron's facility has very strong management concepts and production capability. With the stable development of past over twenty years, the factory built long-term partner relationship with many top [...]

12 07, 2017

Regal’s PCB Mount Mini-Din Connectors

By | July 12th, 2017|Regal|

Regal's "entire line of 5145P3 Series PCB mount mini-din connectors will now be available with a full metal shield and EMI gaskets on the mounting face for superior EMI suppression.  Available in 3 through 8 pin configurations, [...]

12 07, 2017

Wieland Expands PRO Series

By | July 12th, 2017|Wieland|

The new samos® PRO COMPACT modules offering up to 20 safe inputs and 8 safe outputs at a width of only 45 mm already in the base module. With integrated USB, Ethernet and [...]

12 07, 2017


By | July 12th, 2017|Zierick|

"Zierick Manufacturing Corporation has developed an addition to our Insulation Displacement Terminal offerings. The patented 1306-W18 is the first of a series of parts for connecting discrete wires to printed circuit boards. The new 1306-W18 is [...]

12 07, 2017

Heyco-molded Liquid Tight Break-Thru Plugs

By | July 12th, 2017|Heyco|

Heyco's new HEYCo-molded Liquid Tight Break-Thru Plugs are co-molded and elastomer parts that function as Liquid Tight Plugs with an IP 67/68 rating, yet can be pierced by round wire, cable or tubing to function as Liquid [...]

Load More Posts